| Weight | 650 kg |
| Clean delimbing | 320 mm |
| Width in delimbing position | 1350/980 mm |
| Height in delimbing position | 1250/1050 mm |
| Single cut | 500 mm |
| Operating pressure | 210-230 bar |
| Required oil flow | 140-180 l/m |
500C is a powerful alternative for the subsequent thinning and final felling of small stems. Its physical dimensions are suitable for thinning and, thanks to high quality materials, the weight is also contained, only 650 kg. 500C is a multipurpose harvester head equipped with gripping arms that make handling and sorting of timber effortless.
The NCU3 control system adjusts the gripping force of the gripper arms on the shaft shaft, allowing a firm grip during felling, feeding and other operations. When using the combined machine, the separate gripping arms also allow loading without changing the head.
When larger trees are felled and heavier stems are handled, the grapple arms along with the front and rear knives and roll cylinder apply stronger gripping force to the stem. When feeding begins, the gripping force is gradually reduced to minimize friction.
The control system has a diameter limit set to reduce the gripping force. If necessary, the settings can be adjusted via the control system, but usually the harvester head works best with the standard settings.
Request information by filling out the form below, you will be contacted as soon as possible by our staff.
Our offices are open from Monday to Friday at the following time: 08:00-12:30 / 14:00-18:00.
Via dell’Artigianato, 5
35020 Due Carrare (PD)
Tel. +39 049.9125266
Fax. +39 049.9125410
E -Mail:commerciale@adriatica-macchine.com