| Weight | 410 kg |
| Clean delimbing | 320 mm |
| Width in delimbing position | 1100/940 mm |
| Height in delimbing position | 880 mm |
| Single cut | 425 mm |
| Operating pressure | 210 bar |
| Required oil flow | 120-150 l/m |
Nisula 425H is a thinning head equipped with additional knives. The harvester head processes the 11stem in a controlled manner. A new type of head control improves the speed and accuracy of the process.
The new, more powerful traction motors increase the power capacity by 20% compared to the previous model.
The new machined front knives provide greater efficiency and duration of limbing. The additional knives of the new 425H head increase productivity with even larger stems, something that combine heads in the same weight class are unable to achieve. The additional knives also allow for a larger limbing diameter. The head is the most suitable choice for thinning.
Request information by filling out the form below, you will be contacted as soon as possible by our staff.
Our offices are open from Monday to Friday at the following time: 08:00-12:30 / 14:00-18:00.
Via dell’Artigianato, 5
35020 Due Carrare (PD)
Tel. +39 049.9125266
Fax. +39 049.9125410
E -Mail:commerciale@adriatica-macchine.com